Recruitment
Job
Position：Immunology product r&d engineer
Job Requirements:
1. Master degree or above, major in basic medicine/Pathology/Laboratory/biology/immunology or related;
2. Have rich experience in immune-related product development or immunobiology research, and be familiar with or good at one of the following technologies: enzyme immunity, gold label related technology, flow related technology, immunofluorescence, antibody or microsphere coupling technology, etc.;
3. Good English literature review and writing skills;
Familiar with reagent product development process, understanding in vitro diagnostic reagent product registration requirements is preferred;
5, work actively, have good comprehensive quality, good communication and coordination ability; Have strong analytical ability and experimental hands-on ability, can independently complete experimental design and product design.
Job Responsibilities:
I. Responsible for the research and development of flow antibody/enzyme immunity/colloidal gold products, raw material screening, formula exploration, performance evaluation and reaction system optimization;
Ii. Responsible for the formulation of project requirements, plans and schemes and the implementation of specific RESEARCH and development work; Analyze and summarize experimental results and write experimental reports as required;
Iii. Responsible for the preparation of research and development documents and the formulation of process documents and technical standards; Take charge of the pilot and pilot tests of the project, prepare the transfer documents;
4. Compile relevant R & D materials for registration and application when necessary;
V. Quality tracking of products on the market, and technical maintenance of products when necessary;
Vi. Communication and coordination within the department and team work.
Cell product development engineer
Job Requirements:
1. Master degree or above, major in biotechnology, bioengineering, cell Biology, immunology, biochemistry or molecular science;
2. Proficient in cytology experiments and related equipment operation, rich cytology knowledge or research experience, understanding of immune cell therapy, stem cell therapy, cell bank establishment and other related background knowledge;
3. Good English literature review and writing skills;
Familiar with reagent product development process, understanding in vitro diagnostic reagent product registration requirements is preferred;
5, work actively, have good comprehensive quality, good communication and coordination ability; Have strong analytical ability and experimental hands-on ability, can independently complete experimental design and product design.
Job Responsibilities:
1. Responsible for research and development of cell culture, cell detection and cell therapy related products, and optimize product performance;
2. Responsible for formulating the requirements, plans and schemes of research and development projects and implementing specific research and development work; Analyze and summarize experimental results and write experimental reports as required;
Iii. Responsible for the preparation of research and development documents and the formulation of process documents and technical standards; Take charge of the pilot and pilot tests of the project, prepare the transfer documents;
4. Compile relevant R & D materials for registration and application when necessary;
V. Quality tracking of products on the market, and technical maintenance of products when necessary;
Vi. Communication and coordination within the department and team work.
The FPGA engineer
Job Responsibilities:
1. Responsible for the writing, timing analysis and debugging of high-quality FPGA programs related to the parallel drive, parallel data acquisition, parallel processing, parallel transmission and parallel storage of multiple digital image sensors;
2. Timely deal with and solve major technical problems after mass production, feed back to relevant project personnel, track and promote improvement.
Job Requirements:
1. Bachelor degree above 2 years or master degree above 1 year in electronics, precision instrument, communication, automation or related field;
2. Proficient in Verilog or VHDL language and FPGA timing analysis, able to independently complete FPGA algorithm and system implementation;
3. Familiar with the use and development of Xilinx IP cores and modules such as MIPI DPHY, MIPI CSI2, XDMA and PCIe 3.0;
4. Strong self-learning ability, ability to work under pressure, pioneering and innovative spirit, the courage to challenge new technology research and development is preferred.
Product Technical Support (Cell Biology)
Job Responsibilities:
1. Deal with technical problems before and after sales (communication with customers and foreign manufacturers, experiments, etc.);
2. Technical training for salesmen;
3. Preparation of promotional materials;
4. Participate in exhibitions and other promotional activities.
Job Requirements:
1. Master degree;
2. Proficient in cell biology related experimental techniques, transfection, epigenetics related experiments, Western blot, IHC, IF, IP, etc.;
3. Strong English listening, speaking, reading and writing ability, and new technology learning ability;
4. Cheerful and team player.
Reagent sales (several in Guangzhou and Dongguan)
Job Responsibilities:
1. Familiar with the products of the company and competitors, quickly and accurately understand the market situation in the field of biological scientific research, and make preparations for product sales;
2. Used various channels to communicate with suppliers, visit customers, efficiently execute tasks assigned by the company and achieve sales targets;
3. Carried out product publicity and early-stage market development;
4. Timely respond to customers' concerns and accurately feed back to technology so that technology can provide timely and accurate support;
Job Requirements:
1. Graduated from biology, medicine, pharmacy, chemistry or related major;
College degree or above;
At least 1 year sales experience in biological or related field is preferred, fresh graduate is also preferred if good enough;
4. Willing to develop in the field of biological scientific research for a long time and have strong interest and confidence in the sales of biological scientific research products;
5. Have the potential or ability to expand the market, and have strong communication and presentation skills; Strong sense of customer service and teamwork spirit;
6, willing to communicate well with biological field workers, and have common topics;
7. Cantonese is preferred.
Quality inspector (3)
Job Responsibilities:
1. Obey the work arrangement of quality supervisor, timely and accurately complete the tasks assigned by the supervisor;
2. Make statistics and report weekly and monthly quality situation of the workshop, in order to control product quality problems;
3. Responsible for workshop on-site quality inspection and incoming material inspection (including raw material, finished product, semi-finished product and shipment inspection);
4. Issued non-conforming product list according to requirements, and re-inspected and confirmed reworked products;
5. Complete other tasks assigned by leaders.
Job Requirements:
1. 1-3 years working experience in IPQC;
2. Able to wear dust-free clothing, sterile working environment, and accept day-night liner shift arrangement;
3, familiar with ISO9001 /GMP standards, or medical industry training is preferred.
Warehouse manager (2)
Job Responsibilities:
1. Daily management and warehousing management of raw materials, semi-finished products and finished products;
2. Take stock of warehouse products regularly; Ensure tidiness and consistency of accounts and goods;
3. Arrange delivery personnel to deliver goods in time every day;
4. Regularly place purchase orders for raw materials to be purchased;
5. Develop warehouse operation process;
6. Control and distribute warehouse materials;
7. Complete other matters arranged by the leader.
Job Requirements:
1. Be honest and strive for progress;
At least one year working experience;
3. Have forklift license.
Injection Molding Engineer (1)
Job Responsibilities:
1. Participate in the DFX scheme review during the development process, be responsible for the design evaluation of the developed new mould process, and put forward the improvement scheme for the problem points;
2. Responsible for testing new products and determining the best process parameters, identifying product and mold defects in trial production and promoting improvement;
3. Lead the analysis and solution of injection process problems of mass production products, coordinate the process quality and early stage improvement, follow up until closing;
4. Responsible for the development of new process plan for injection molding industry, and the evaluation and import of process production equipment;
5. Responsible for process technical guidance on injection molding site, process standard document writing and issuing, change maintenance and management;
6, familiar with injection molding machine operation, mold structure and common plastic raw material characteristics (familiar with PC, PVC preferred, currently using Oriental);
Familiar with injection molding process debugging and injection molding industry quality standards;
8. Have the mold review and risk assessment in the early stage of product design;
9. Complete other tasks assigned by direct superior.
Job Requirements:
1. Have the knowledge of mechanical drawing, can read the product drawings, can check the size and appearance of the product against the requirements of the drawings, and can skillfully use CAD, UG, Pro-E and other drawing software;
2. 3-5 years working experience;
3, high degree of coordination, strong execution.
Production plan (1)
Job Responsibilities:
1. Prepare daily production plans and track production progress according to sales orders;
2. Deal with abnormal problems in the production process, including but not limited to communication and coordination with people, machines, materials, hair and environment;
3. Follow up and coordinate material progress according to production plan;
4. Timely find, classify and sort out abnormalities in the production process of each process, identify and give early warning to risk factors affecting delivery, and form review data for internal and other departments to improve;
5. Good communication and coordination skills, and positive working attitude.
Job Requirements:
1, College degree or above, excellent experience can be relaxed;
At least 2 years working experience, familiar with injection molding industry is preferred;
3. Experienced in ERP operation;
4. Good planning, organization, communication and logical thinking skills.